FLCZNU

Single metal cock rings come in many sizes and can be a fraction of an inch thick to three inches plus thick. For now we will talk about the standard thin metal cock ring. Each type of cock ring uses a different technique to put it on. The diameter of the cock ring depends on your cock size and how advanced you are at using them. Someone with years of experience might get his entire normal sized cock contained within a 1 ½ diameter ring where another new user might not be able to do any better then a 2.5 to 3 inch diameter cock ring. When you are just starting out, just learning how to put on a cock ring you should always make sure to use a larger ring and be sure to have your entire cock lubed with oil or silicone based lube. The best technique and the one that will work well even on very shall diameter cock rings is the balls first method. When putting on a metal ring When you are using a very small ring you must be able to gently pull one testicle through at a time, sometimes it takes quite a bit of work to get them through. When using the very tight cock rings it may not seem like there is enough room for the cock shaft to fit in once the balls are in. Make sure the shaft is well lubed and flaccid and gently work it under the ring until it slides through. Be careful not to leave a ring on to long, they can cause damage to the blood vessels and the nerves. Very tight rings feel fantastic and keep you very hard for long periods of time along with increasing the stimulation factor, but remember that very tight cock rings can cause bruising to the shaft and the balls. On the extenze reviews you able to learn how to push one testicle at a time through the cock ring then when both are through pull the cock shaft through. This is good same as penis enlargement topics.This might not be necessary on larger rings but it is good practice for small diameter cock rings.